Engine Tuning
1.8TFSI ECU Upgrade
The APR 1.8 TSI Valve Lift ECU Upgrade is an expertly recalibrated engine control strategy that remaps the boost pressure, timing and air fuel ratios to provide smooth and reliable power as if intended by the OEM. APR's ECU Upgrade is developed to work within the OEM and Tier 1 Supplier specifications for engine component stress tolerances and performance specifications. APR's ECU Upgrades are available in octane specific versions to allow you to take full advantage of the fuel quality available in your area. APR's patented EMCS functionality puts the control of the engine's operation at your finger tips and allows for additional features and options to be installed to your OEM ECU.
Not only does our Stage I ECU Upgrade give you higher peak numbers of 189 horsepower (141kw) and 226lb-ft. (306nm) of torque, but also gains of up to 44 horsepower (33kw) and 60lb-ft (81nm) are available throughout the power band! APR's ECU Upgrade is the best power per dollar modification for the new 1.8 TSI and gives it just the extra edge these cars lack from the factory without pushing the limits. With factory like smoothness and drivability APR's ECU Upgrade will fill the void in an otherwise excellent car.
2.0T Upgrade
APRs Stage I software give you higher peak numbers of 188kw (252 hp) and 411nm (303lb-ft.) of torque, but also gains of up to 45kw (61 hp) are available at lower rpms! This software is the ultimate upgrade for the new 2.0T and gives it just the extra edge these cars lack from the factory, without pushing the limits. With factory like smoothness and drivability, the new power will fill the void in an otherwise excellent car.
2.0T - Audi S3 Upgrade
APRs Stage I software give you higher peak numbers of 239kw (320 hp) and 430nm (317lb-ft.) of torque, but also gains of up to 45kw (61 hp) are available at lower rpms! This software is the ultimate upgrade for the new S3 and gives it just the extra edge these cars lack from the factory, without pushing the limits. With factory like smoothness and drivability, the new power will fill the void in an otherwise excellent car.
2.0TSI Upgrade
The ultimate chip upgrade for the 2.0TSI engine is available from APR. After months of long nights and many hours of dyno work we are pleased to offer you chip tuning that is second to none. We have worked hand in hand with many customers to deliver a chip that works. Expect huge increases in low-end torque, improved throttle response and a smoother, more powerful top end.
Not only does our Stage I software give you higher peak numbers of 254 horsepower (189kw) and 297lb-ft (402nm) of torque, but also gains of up to 61 horsepower (45kw)available at lower rpms! This software is the ultimate upgrade and gives it just the extra edge these cars lack from the factory, without pushing the limits. With factory like smoothness and drivability, the new power will fill the void in an otherwise excellent car.
APR TDI Maps are also available - please call for application details - 0208 681 0208
| |
price |
| 1.8TFSI Upgrade |
£586.33 |
| 2.0T Upgrade |
£586.33 |
| 2.0T Audi S3 Upgrade |
£586.33 |
| 2.0TSI Upgrade |
£586.33 |
| 3.2 V6 Upgrade |
£440.62 |
| TDI Upgrades from |
£440.62 |
Stage 2 Tuning from Tuningwerkes available.
This compromises of the APR Remap and also induction & exhaust upgrades. The power readings obtain in excess of 252bhp - producing a very quick 2.0T!
Stage 3 APR Kits from Tuningwerkes

These kits are expertly put together and include all the hardware you will need to complete a Turbo Upgrade. The components are carefully selected after rigorous testing by APR and reliability is proven.
Additional items may be required - depending on customer's vehicle specs.
Please call for more details - 0208 681 0208
Diesel Tuning
We offer APR TDI Diesel remaps for all modern VAG vehicles. For more info - please contact us on 0208 681 0208, or use the contact form on this website.

We also supply and fit the Tunit range of modules for SDi, TD and TDI variants of the VW Audi Seat & Skoda ranges.
These are a superb piece of engineering. Simple to add on and simple to remove. Fitting is normally achieved in 30 minutes!
Click on the logo for an all makes listing!
Diverter Valves 2.0T FSI
 |
Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG 2.0 litre FSi Turbo Engine, and the procurement of our own development/project car, we have developed a Patented Atmospheric Blow-Off Valve adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch ME9 engine management systems employed on the following vehicles: Audi A3 2.0T FSI Audi B7 A4 2.0T FSI Volkswagen MK5 Golf GTI/Jetta GLI 2.0T FSI. |
| £48.86 |
|
 |
A switchable valve for the 2.0 litre FSi Turbo engine which allows a choice of Blow off (loud) / Blow off and partial recirculation (intermediate) or total recirculation (quiet). This gives you the choice of exactly how loud you wish your valve to be . |
| £108.26 |
|
 |
If you are running increased boost pressures, after a software remap (chip), or the OEM valve is being subjected to high temperatures, the lifespan of the unit is significantly reduced. Even without any modifications taking place to the vehicle at all, this OEM valve has been shown to fail over time and it’s boost holding capacity also leaves some room for improvement.
We now have the world’s first fully engineered solution offering both significantly improved reliability as well as valve related boost response. The Forge Motorsport valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. |
| £139.14 |
|
Filters and Induction Kits

We carry the BMC, JR Response, Carbonio & Powertec ranges. Jetex & BMC are virtually household names in filtration.
All the above filtration systems provide your cars with better filtration characteristics over standard units.

| Replacement Panel Filters |
£ inc VAT |
| Jetex filter 1.6 FSI |
|
| Jetex filter 1.9TDI & 2.0TDI |
|
| BMC filter 1.6 2003> |
|
| BMC filter 1.6 FSI engines |
|
| BMC filter 2.0 FSI engines |
|
| BMC filter 2.0 T FSI engines |
|
| BMC filter 3.2 V6 |
|
| BMC filter TDI variants |
|
| Induction Kits |
|
| BMC CDA system 2.0TDI 140bhp |
|
| Powertec kit 2.0T FSI NEW!! PT45-24 |
|
| Powertec kit 2.0 TDI NEW!! PT45-23 |
|
| Carbonio CAI kit 2.0T |
|
TFSI Air Intake
High quality genuine carbon fibre air intake for the VAG 2.0 Turbo FSI engine.
Applications:
-
VW Golf Mk5 GTI 2.0T (inc Edition 30)
-
Seat Leon Mk2 2.0T FR/Cupra
-
Skoda Octavia Mk2 vRS 2.0T
-
Audi A3 2.0T
-
Audi S3 2.0T
- Audi TT 2.0T

Replacing the factory air box, this intake kit gives a typical increase in torque of over 10% with an airflow increase of approximately 50% over the factory system.
Comes complete with a full fitting kit and oil-free Pipercross performance air filter (worth £34.85rrp).

Silicone Hoses
Coolant hoses from Forge. This kit contains 8 hoses.
Price £179.00 inc VAT
Exhaust Systems
 
Tuningwerkes offer Supersprint and Milltek systems for this car.
Supersprint have been offering good looking (and extremely well built) systems for years and offer good gains in power.
We have seen noticeable gains in power from units like the Milltek Sports.

Milltek Sport performance exhausts have a genuine performance edge - noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration.
- Transforms performance and driveability
- Sharper throttle response
- Precision, quality controlled manufacture
- Highest quality aircraft grade stainless steel
- Low pressure systems for maximum performance.
- Responsibly developed and engineered
| Milltek systems |
|
| System cat back non resonated |
£400.69 |
| System cat back resonated |
£474.12 |
| Hi-flow cat & downpipe 2.0T |
£582.39 |
| System 2.0T quattro non resonated |
£358.81 |
| System 2.0T quattro resonated |
£434.82 |
| System 2.0TDI cat back res Discrete or Twin Jet |
£423.21 |
System 2.0TDI cat back non res Discrete or
Twin Jet |
£360.60 |
| Hiflow large bore downpipe 2.0TDI |
£160.95 |

Suspension

Tuningwerkes has a great relationship with the world leaders in suspension development and design.
We supply leading names such as H&R, KW Suspensions and Eibach.
There are a lot of companies out there. There are - however, only a few good ones with proven R&D, TUV approval etc.
There are cheap suspension kits on the market - and you will see more expensive ones too. The difference is not merely in the name. There is a lot of work that goes into suspension design. A lot of factors have to be taken into consideration before a manufacturer can release a kit. Take a look at the big names. Eibach - supply race cars the world over. H&R - Original Equipment suppliers to VW for their Golf R32s and to Mercedes race teams. KW Suspensions - suppliers to VW Racing! Do any of the cheaper brands have such pedigree? Do they have their own R&D?
Fitting a suspension kit to any car is a serious decision. Not only are looks improved, but the safety of the vehicle on the road is also an issue -that's why after years of hands on experience, we can advise you which kit is the best for your application.
We are also proud to announce we are the only Official H&R and KW Suspension outlet for Croydon, Surrey making us the preferred choice of these two major brands for service, collection, mail-order & fitting! (all fitting is done on site!)
| Eibach Products |
|
| Springs 1.4/1.6 -30mm |
|
| Springs 1.9TDI/2.0FSI -30mm |
|
| Springs 2.0TDI -30mm |
|
| Coilover Kit |
|
| Weitec Products *weight/year info required |
|
| GT Coilover kit |
|
| GT Coilover kit quattro models |
|
| KW Suspension *weight/year info required |
|
| KW Variant 1 all inc Sportback |
|
| KW Variant 2 all inc Sportback |
|
| KW Variant 3 kits available - please call |
|
| KW Suspension kits (non coilover) from |
|
| KONI equipment also available |
|
| Anti Roll Bars |
|
| Eibach Anti Roll Bars A3 8P & Sportback |
|
| H&R Anti Roll Bars 26/22mm |
|
| H&R Anti Roll Bars 28/24mm |
|
| H&R Anti Roll Bars 28/24mm quattro only |
|

From wheel spacers and springs to anti-roll bars and complete coil over suspension kits - we can transform the handling of your vehicle!
Call Tuningwerkes today for your vehicle's requirements - or use the contact form.
Brakes
World renown EBC brake pads and disks have proven a hit with many car clubs, enthusiasts and track racers.
Tuningwerkes can supply Green and Red Stuff pads for road use as well as track equivalents. Please call for prices on disks and pads.
We also supply AP Racing 4 piston brake upgrades too. Please call for your application requirements.

TAROX - We are main agents for TAROX and can supply and fit their excellent quality Brake Pads - through to their Big Brake Kits! Please call 0208 681 0208!
We are a main agent for BREMBO components too. For the ultimate in BIG Brake conversions - click HERE
Styling
 

| ABT Audi AS3 Front spoiler |
£POA |
| ABT Audi AS3 Rear Spoiler |
£POA |
| ABT Audi AS3 Sideskirts |
£POA |
| ABT Audi AS3 Rear Valance |
£POA |
| ABT Audi A3 Single Frame front |
£149.99 |
For Caractere - please call us on 0208 681 0208 whilst the Caractere section is being built.
Wheels and Tyres
For wheels and tyres, please click HERE.
All prices inc VAT (unless stated) & subject to change and Terms
|