An essential upgrade for cars which will spend time on track. The Solid Adjustable Top Mounts are the highest quality camber plates on the market, combining massively improved wheel control and adjustment with surprisingly good refinement. Exactly as used on our race cars.
This product is no longer in stock
Warning: Last items in stock!
If you are serious about high performance use, with some track use thrown in, you should seriously consider fitting the Solid Adjustable Top Mounts. By replacing the entire, soft rubber factory top mount with a precisely engineered, near-solid replacement, the precision of your wheel control is transformed. Rather than the ‘squidge’ under load from the original rubber mounts, you will feel instant, precise responses with much improved feedback.
As well as the solid connection with your car, the Solid Adjustable Top Mounts give you the facility to adjust the camber of the front wheels. Additional negative camber (bringing the tops of the wheels inboard) will really give a night-and-day difference on track by keeping the wheels upright in hard cornering. No longer will you wear and overheat just the outside edge of your tyres on a track-day.
A unique design feature of all our Coilover kits is that both Suspension Systems (StreetSport and StreetSport PLUS) are fully compatible with either solid adjustable Top Mounts or the standard rubber mounts. Unlike many Top Mounts available on the market, these plates are a direct swap that require no cutting and are completely reversible back to standard.
Why fit them? The Top Mounts offer several degrees of camber adjustment allowing the track minded driver to dial in the suspension even further without breaking the bank. This can help greatly with turn-in on track, really transforming the front-wheel drive tendancy to understeer. Another reason for choosing Solid Adjustable Top Mounts is to remove the compliance in the original rubber bushing. The feeling of directness and connection to the car is also transformed, taking away the feeling of slack and ‘rubberiness’ that can often be the case in production cars.
Another key advantage is to help with clearance of the tyre inside the wheel arch. This can be very tight on Golfs with a low ride-height and wide tyres – but adding in negative camber to the wheels ‘tucks’ the tops of the wheels inboard helping greatly with clearances.
The downside? Well, solid top mounts will in general increase noise to some degree. The Top Mounts use a unique ‘pillow ball’ top bearing, which minimises the harshness that most top mounts give – meaning that there is almost no compromise involved to refinement in the car. The ability to offer them as an upgrade for the spirited driver looking to maximize his or her experience with the ultimate in performance is another unique aspect to the StreetSport Coilover family.
The Solid Adjustable Top Mounts have been developed via our race programme exclusively for the A5-platform VWG cars such as Golf 5 & 6, Scirocco, A3, S3, Leon and Octavia.
The Solid Adjustable Top Mounts have been designed to work with all of our coilover suspension systems, and also with our Anti Roll Bars and Adjustable Drop Links.
Fitment is relatively simple. The drop links are straight bolt-on replacements for the originals, requiring no modifications to fit.
Above – the ultimate TrackSport coilover kit includes the Top Mounts
|All Compatible Volkswagen Cars||All Compatible Volkswagen Group Cars|
No customer reviews for the moment.